Comparison between hydrogen and oxygen decarbonization machine ＆ traditional decarbonization method
Automobile hydrogen oxygen decarbonizer is an extension of water welder equipment, which is mainly used to remove carbon deposits in the combustion chamber of the engine. In the past, the way to remove coke deposits was mainly through the use of highly corrosive cleaning agents after disassembling the engine. The automobile hydrogen-oxygen carbon removal machine does not need to disassemble the engine, so it is easier and faster to clean the carbon deposits. The automobile hydrogen-oxygen decarbonization machine mainly uses the electrolysis of water to generate hydrogen-oxygen mixture (Brown gas) through the intake pipe to advance the engine combustion chamber, and use the high temperature generated by the combustion of hydrogen in the combustion chamber to remove the carbon deposits in the combustion chamber. This method subverts the traditional decarbonization mode, it saves the time of car maintenance, reduces the cost and is environmentally friendly and pollution-free. Automobile hydrogen and oxygen decarbonizers are gradually replacing traditional decarbonization methods.
The automobile hydrogen-oxygen decarbonizer extracts hydrogen and oxygen atoms from the water by electrolysis to form a hydrogen-oxygen mixed gas flow, which is fed into the engine combustion chamber through the engine intake manifold. After the Brown gas fills the engine combustion chamber, it is ignited and ignited. Principle (active atoms such as O, H, and OH can be generated during high-temperature combustion, on the one hand, it can promote the high-temperature cracking of the medium and long hydrocarbon chains in gasoline, and speed up the oxidation reaction), oxygen-enriched combustion principle (wax in gasoline Impurities such as colloids and colloids are also composed of long hydrocarbon chains or ultra-long hydrocarbon chains. Active atoms such as O, H, and OH can also accelerate their cracking and eventually remove carbon deposits), the principle of water-hydrogen cycle and other Brown gas characteristics. The carbon deposits on the engine are completely and thoroughly removed to restore the power of the vehicle without causing any damage to the engine, avoiding the lack of traditional chemical decarbonizers, and it is a qualitative leap in the field of vehicle maintenance.
After using the car’s hydrogen and oxygen decarbonizer, the coke deposits are effectively cleaned up, the exhaust emissions are greatly reduced, the engine power is restored, and the car’s fuel consumption is reduced. Compared with traditional carbon removal methods:
| Hydrogen oxygen machine suction type | Traditional disassembled engine | Manifold suction cleaning liquid type | Water-based foam removable | |
| Carbon removal time | 20mins | About 2-4 hours | 40mins | 40mins |
| Environmental protection | Complete combustion, non-toxic ＆ harmless | Soot particles, Difficult to dispose of waste liquid | Toxic and harmful exhaust | Difficult to dispose of waste liquid |
| Pros and cons | Just run the engine at idle speed | It takes a long time, destroys the original factory assembly, and is intuitive to clean | The engine is idling, and the medicine is inhaled continuously | The application process is cumbersome and the carbon removal is incomplete |
| Cost | Decarbonization cost | Disassembling the working hours of the engine, oil, oil filter, antifreeze | Carbon removal fee, oil, oil filter | Carbon removal fee, oil, oil filter |
So, it is obvious that hydrogen and oxygen decarbonization machine is the best. HHO carbon cleaning machine, your best choice machine! Welcome to contact us to know more!
